Animal Surgical Equipment Accessories
Med Vet International Cortical Self-Tapping Screw, J0421NS, 1.25 Pitch, 3.5mm x 36mm, Each
1.25 Pitch. Din 58812. Use with 3.5mm compression plates to obtain fracture-site compression. Self-tapping threads sold in single packs.Self-Tapping screws save time and work extremely well in most circumstances especally in the proximal tibia for TPLO and TTO. Screw. Self-Tapping. 36mm L. Stainless Steel.
Med Vet International Cortical Screws, J0421J, 1.25 Pitch, 3.5mm x 28mm, 6 Count
1.25 Pitch. Din 58812. Use with 3.5mm compression platesto obtain fracture-site compression. 6/pk. Self-Tapping: 10mm through 40 mm.
Med Vet International Mid-Shaft Positive (Raised) Threaded External Fixation Pins, Small, J0371A, Each
Positive or raised thread pins have threads extending above the smooth shaft on a portion of the pin. The positive threaded pins have a tougher pull-out resistance and are the external fixation pins used almost exclusively in human orthopedics. There are two choices of pin styles and three different sizes.1. Threaded portion is in mid-shaft2. Threaded portion is at the end of the pinAll pins are 316LVM implant quality stainless steel.
Med Vet International Nitrogen Recessed Wall Outlet, J0537NW, Each
"Ganging" medical gas outlets has been done in human hospitalsfor many years. Now veterinarians are adding more gas and vacuumuses in their hospitals.In addition to our oxygen outlets, you can order nitrous oxide,vacuum suction, and nitrogen outlets. They are ordered individually— this is the outcome when they are "ganged" together.
Med Vet International Self Tapping Screw, J0404J, 2.7mm x 38mm, 6 Count
For use with 2.7mm (7/64") round-hole plates in small- to medium-sized patients. 6/pk.
Med Vet International Cancellous Lag Screw 4.0mm x 16mm L, J0425D, Each
4mm Cancellous (Part Threaded) Lag Screw. For use as a lag screw without overdrilling of proximal fragment. 1/pkg.
Med Vet International Headless Lag Screws - 2.0mm X 15mm, J1334B, Each
Headless Lag Screws - 2.0mm X 15mm, J1334B, Each
Med Vet International 6mm x 16mm Stainless Steel TTA Cage, J1072JA
TTA (Tibial Tuberosity Advancement) CagesStainless SteelCage 6 x 16mm
Med Vet International Support Harness for MB Spinal Brace, 24", 19"-21" Circumference, J1241G
Many cases of disc disease, spinal fractures or instabilities are not amenable to surgical treatment for a variety of reasons, from the right patient signalment (i.e. age, underlying diseases) to economic considerations. The” MB Spinal Brace” (MBSB) is designed to help support cases of cervical, thoracic and lumbar IVDD, vertebral fractures or instabilities. The durable and comfortable neoprene harnesses encircle the patient at the desired locations and are connected by two parallel adjustable metal rods that lay on the lateral aspects of the chest, abdomen or neck depending on particular area being treated. The MBSB supports and restricts the range of motion of the patient in several planes giving the body a better chance of healing. The expandable metal connection rods can be placed in a neutral position strictly for support, or extended to apply minimal to mod- erate decompressive forces on the spine.
Med Vet International Jorvet Needle Bar for Tattoo Kit, J0276D1, 5/Pack
Jorvet Needle Bar for Tattoo Kit, 5/Pack. Used for animal identification.
Med Vet International Locking Screw, J1220A, 2.4mm x 8mm, Each
Jorvet 2.4 twin start locking screws (J1220 series) are fully compatible with the industry standard. The 2.4 locking plates (J1220 series) are available in 4 to 18 hole sizes.2.4mm Locking Screw 2.4 head 8mm long
PATTERSON VETERINARY SUPPLY INC Hose Assembly 10ft Air Supply with DISS Female on Each End, Each
This item has a minimum qty of 3 per supplier requirements.
Hose Assembly 10ft Air Supply with DISS Female on Each End
Med Vet International 2.4mm x 30mm Cortical Self-Tapping Screws, J1073K, 6-Pack
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.